Sindoh M403 - Manual (Page 167)

4-
39
Settings of Each Function
4
Note
- In the control panel, you can print the network report.
- If “SINDOH M400 Series Printer Status Monitor” connected via the USB port is running,
you cannot use SINDOH MFP Network Configuration.
If “SINDOH M400 Series Printer Status Monitor” connected via the USB port is showing in
your PC tray, close it, and then run SINDOH MFP Network Configuration.
When the device is shipped from the manu facturer, its default network setting is DHCP. To use the
fixed IP, contact your network administrator. If the IP address is selected arbitrarily, the device may
not be connected to the network.