Sindoh M403 - Manual (Page 209)

5-
37
Maintenance and Troubleshooting
5
Status Verification Solution Reference Page
No output paper. Check if there is
jammed paper in the
ADF. Remove the jammed
paper and reload the
document. P. 5-15
Frequent document
jam. Check if the proper
document is used. Use the proper
document. P. 1-29, P. 2-3
Check if the
document guide is
properly adjusted. Adjust the guide to
the document. -
Check if there is a
paper segment in the
ADF. Open the ADF cover
and tray. P. 5-23
Check if the roller is
clean. Clean the roller. P. 5-15
Cannot close the
cover. Check if only one
side of the cover is
pressed. Press the both sides
of the cover. -