Mfp maintenance, Saving consumables, Ordering consumables – Sindoh M403 User Manual
Page 175: Cartridge ordering
5-
3
Maintenance and Troubleshooting
5
2. MFP Maintenance
Remove the cartridge and clean up the MFP to keep it in its optimal conditions.
「Toner Cartridge Replacement」 (P. 5-6) and 「Cleaning」 (P. 5-15)
If the MFP is used by several users, designate one responsible for device maintenance.
Saving Consumables
Save Consumables to reduce printing costs.
Use settings to save toners and paper.
Go to [Print Settings] -> [Darkness] to decide toner darkness.
The available value is 1 (lightest) to 10 (darkest).
. Toner darkness can be controlled in the
printer driver, too.
Ordering Consumables
Contact your dealer to order consumables.
Cartridge Ordering
If [Toner Low] is displayed, order a new cartridge. If the output is not clear while [Toner Low] is
displayed, shake the cartridge. This will make the output a little clearer. However, the cartridge
should be replaced as soon as possible.
Available cartridge capacities are 2,500 sheets, 5,000 sheets and 8,000 pages. They are based on
the average use (5% printing).
Caution
- If you keep using the device after [Toner Low] is displayed without replacing the cartridge,
[Toner cartridge Change] is displayed and the device stops. Replace the old cartridge.