Sindoh M403 - Manual (Page 155)

4-
27
Settings of Each Function
4
TCR Report Setting
You can automatically print the TCR report according to your settings.
1
Go to 【MENU】 [Settings] [Fax Settings] [FAX Report Setup] [TCR Report Set].
2
Press the ◀ or ▶ button to set your settings.
3
Press the OK button to apply your settings.
- On: For every 30 Tx/Rx events, the TCR report is printed automatically.
- Off: The TCR report is not printed automatically.
TCR Report Printing
You can print the TCR report manually.
1
Go to 【MENU】 [Reports] [Fax TCR Report].
2
Press the OK button to print out the communication history report.