Sound Devices 788T - Manual (Page 126)

Fader Assignment
The CL-2 Fader controls the fader level of any 788T Input. Fader assignment is done in Setup Menu
option CL-2: FADER ASSIGN.
When connected, the 788T fader or CL-8 fader (if attached) of the selected input will be disabled and
replaced by the CL-2 fader.
Movement of the 788T or CL-8 fader will have no effect on an assigned input while the CL-2 is con-
nected. If the Setup Menu option INPUT: FRONT PANEL CONTROLS is set to Trim Controls and there
is no CL-8 attached, the input selected will be the only input with a fader control. When set to Trim
Controls all other input fader levels default to unity gain (0 dB).
CL-2 Switches
The CL-2 is equipped with two, two-position programmable toggle switches that can be assigned to
control select functions of the 788T. Switches 1 and 4 are momentary switches and Switches 2 and 3
are latching. The Switches can be assigned to control the following functions in the Setup Menu op-
tion KEYBOARD/LOGIC IN: ASSIGN. Please note that momentary switches can be assigned to have
momentary or toggle action, toggle switches can only be assigned to toggle action.
Function Switches 1, 4
(Momentary)
Switches 2, 3
(Latching)
Notes
Momentary Toggle Toggle Only
Record Button    Sw 1,4 Momentary - Hold to record, release to stop.
Sw 1,4 Toggle - Press and release switch to record,
press and release again to stop.
Sw 2,3 Toggle - On enters record, Off stops the
recording.
Play Button    Sw 1,4 Momentary - Hold to play, release to pause.
Sw 1,4 Toggle - Press and release switch to play,
press and release again to pause.
Sw 2,3 Toggle - On enters playback, Off pauses
playback.
Stop Button  Record Mode - Stops recording
Playback Mode - One press pauses, two presses
stops playback
Fast Forward Button  Press and hold to fast forward playback, release to
resume playback
Rewind Button  Press and hold to rewind playback, release to
resume playback
Menu Button    Sw 1,4 - Acts as Menu Button
Sw 2,3 - On enters Setup Menu, Off exits
HDD Button    Sw 1,4 - Acts as HDD Button
Sw 2,3 - On enters Take List, Off exits
Tone Button  Acts as the Tone Button (Generates Tone from Main
LCD display only)
Brightness Button    Acts as the Brightness Button
Input Button    Sw 1,4 - Toggles Track Setup Window / Exits
Sw 2,3 - On enters Track Setup Window, Off exits
Power Button  Functions in the Main Display only
Powers down the 788T, does not initiate power up
788T/788T-SSD User Guide and Technical Information
118
v. 3.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Hardw
are Controllers
10