Sound Devices 788T - Manual (Page 132)

Aux Routing View
From the Aux Routing View any input can be routed to Track X1 (Aux 1) or X2 (Aux 2) by pressing
the A and B buttons respectively. While in the Aux Routing View the L, R, Lim, Input Polarity and
High-Pass Filter LED indicators are disabled. The Aux 1 and 2 LEDs will illuminate solid for any in-
put that is currently routed to X1 and X2 tracks. The LED illuminates green when the input is routed
pre-fade to the Aux track. The LED illuminates red when the input is routed post-fade to the Aux
track. Toggle between pre and post fade routing by pressing and holding the A and B buttons for
each input. If the input hasn’t been assigned to an Aux track the LED will fl ash. Press the ALT button
to move to the Input Setting View.
Input Settings View
From the Input Settings View apply various input settings to any input. Press the A button to en-
able/disable the Limiter. Press the B button to enable/disable the High-Pass Filter. Simultaneously
press the A and B buttons to invert the polarity of the input.
While in the Input Settings View the L, R, Aux 1, and Aux 2 LED indicators are disabled. Limiter and
High-Pass Filter LEDs illuminate solid yellow when the respective input setting is enabled. Input
Polarity LEDs illuminate solid blue when the input’s polarity has been inverted. The LEDs will fl ash
respectively on each input if the Limiter and High-Pass Filter are disabled and Input Polarity is nor-
mal. Press the ALT button to return to the Main View.
Slate Mic
The CL-8 provides access to the 788T’s Slate Mic, which is commonly used for slating a take or mak-
ing general announcements.
The term Slate Mic is commonly used in the industry when referring to a microphone used to com-
municate. To avoid confusion in the following text, the term Slate Mic will refer to the Slate routing,
and the term Com Mic will refer to the microphone used to communicate in all of the communica-
tion circuits. The CL-8 provides access to the Slate routing only. The CL-9 Linear Fader Controller
provides access to the Slate Mic and the talk back (COM1 and COM2) circuits.
Com Input Source
788T/788T-SSD User Guide and Technical Information
124
v. 3.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Hardw
are Controllers
10