Sound Devices 788T - Manual (Page 135)

CL-9 Linear Fader Controller (optional)
The CL-9 Linear Fader Controller is an optional accessory for the 788T Digital Recorder. It signifi -
cantly expands the mixing capability and accessibility of the recorder. The following is a list of key
features of the CL-9.
• 100 mm ultra-low latency linear faders on each input for precise control of post-fade levels
• Master rotary faders for Left, Right, Aux1, and Aux2 Tracks
• Provides access to the 788T parametric EQ
• Provides access to continuous pan to the Left and Right Tracks
• Provides access to the slating system
• Provides access to two separate private bidirectional talk back systems
• Allows user to quickly change parameters of various functions
• Allows user to quickly change input-to-track routing and track enabled status
• Allows user to quickly solo any input, track, or output in the headphone monitor
• Ability to quickly mute outputs
• No extended power sources required. Control and powering via a single USB cable.
CL-9 Connection
The CL-9 is connected to the 788T and powered from it via USB; no other powering source is re-
quired. Connect the 788T’s rear panel KEYBD USB-A port to the CL-9’s rear panel 788T USB-B port.
Once connected, the CL-9 immediately updates according to the 788T’s latest version of fi rmware.
Connect the 788T Headphone Output to the CL-9’s 788T Headphone Input on the rear panel using a
3.5 mm or 1/4-inch to 1/4-inch TRS cable. This allows the CL-9 to be the master headphone control
of the entire 788T/CL-9 system.
The following warning screen appears when the USB connection between a CL-9 and 788T is dis-
rupted.
Hardw
are Controllers
10
788T/788T-SSD User Guide and Technical Information
127