Sound Devices 788T - Manual (Page 158)

# Setup Name Description Options
Factory
Default
18. Input: Track Routing
Allows the user to setup the routing
matrix among all available inputs and
tracks. There are preset routings and
three custom routings available.
Press and hold the STOP key then
press the INPUT key repeatedly to
cycle through all preset routings. This
only routes Inputs to Tracks, Track
arming is done independently in the
Track Settings Window.
• 2 track (1:L, 2:R)
• 2 track (1:A, 2:B)
• 4 track (1:L..4:B)
• 4 track (1:A..4:D)
• 6 track (1:L..6:D)
• 6 track (1:A..6:F)
• 8 track (1:L..8:F)
• 8 track (1:A..8:H)
• 1 mix (L), 6 Iso (A-F)
• 1 mix (L), 8 Iso (A-H)
• 2 mix (L,R) 6 Iso (A-F)
• 2 mix (L,R), 8 Iso (A-H)
• Custom Route 1
• Custom Route 2
• Custom Route 3
• Edited
• 2 mix (L,R) 8 Iso
(A-H)
Input 1 = Track L,A
Input 2 = Track R,B
Input 3 = Track L,C
Input 4 = Track R,D
Input 5 = Track L,E
Input 6 = Track R,F
Input 7 = Track L,G
Input 8 = Track R,H
19. Input: Linking, MS
Selects whether the input levels
are controlled independently, as
stereo pairs, with or without mid-side
decoding, or multiple inputs grouped
together.
• Unlinked
• 1-2
• 1-4
• 1-6
• 1-8
• 3-4
• 5-6
• 7-8
• 5-6, 7-8
• 1-2, 3-4
• 1-2, 3-4, 5-6
• 1-2, 3-4,
5-6, 7-8
• 1-2MS
• 3-4MS
• 5-6MS
• 7-8MS
• 1-2MS,
3-4MS
• 1-2MS, 3-4MS, 5-6MS
• 1-2MS, 3-4MS, 5-6MS,
7-8MS
• 1-2MS, 3-4, 5-6
• 1-2MS, 3-4
• 1-5
• 1-5, 7-8
• 1-5, 7-8MS
• 1-2, 4-8
• 1-2MS, 4-8
• 1-4, 5-6
• 1-4, 5-6MS
• 1-3
• 1-2, 3-4MS\
• 1-2, 3-4MS, 5-6
• 1-2, 3-4MS, 5-6, 7-8
• 1-6, 7-8
• 1-6, 7-8MS
• 5-8
Unlinked
20. Input: MS to Pre-Fade ISO
Select where MS decoding is applied,
when activated. “On” sends MS
decoded signal to any track the input
is routed to. “Off” causes pre-fade
signal routed to ISO tracks (A-H) to
be pre-MS decoding.
• On
• Off
On
21. Input: Front Panel Controls
Sets the Input Gain Potentiometers to
act as Faders, Trims, or Input Enables
only. When set to Fader Controls or
Input Enables Only, the Rotary Switch
will control the trim level of the input
from the Input Settings Window. Fader
Controls is not available when CL-8 is
attached. When set to Trim Controls,
the gain pots will only effect trim
level. When set to Input Enables Only
the front panel controls will simply
activate/deactivate the input. This
Setup Menu Option is not available
when the CL-9 is attached.
• Trim Controls
• Fader Controls
• Input Enables Only
Trim Controls
22. Input: Fader Range
Sets the range of attenuation avail-
able on the faders. This applies to
all faders, including the Front Panel
Controls (when set as faders), the
CL-2 fader, and the CL-8 faders.
• Wide (Off to +15 dB)
• Fade Only (Off to 0 dB)
• Narrow (-15 to +15 dB)
Wide (Off to +15)
788T/788T-SSD User Guide and Technical Information
150
v. 3.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Se
tup and Shor
tcut R
eference
11