Sound Devices 788T - Manual (Page 139)

The 0 dB, or unity gain, position can be calibrated using the 788T Setup Menu option FADER CAL. To
calibrate the faders, set all of the CL-9 faders in the 0 dB position, then enter the Setup Menu option
FADER CAL
and press the check mark.
The Faders range is selected in the Setup Menu option INPUT: FADER RANGE between Wide, Fade
Only, and Narrow. A Wide range (factory default) results in fader control from negative infi nity (off)
to +15 dB. Fade Only allows the user to attenuate the fader level from negative infi nity (off) to 0 dB.
A Narrow range allows the user to adjust the fader level from -15 to +15 dB.
CL-9 Master Gain Level Controls
The CL-9 Master Gain Level Controls adjust the level of the tracks L, R, X1, and X2. Levels are adjust-
able from -60 to +15 dB. The 12 o’clock position is unity gain (0 dB). When adjusting a track’s level
control, the level of each track in the stereo pair is temporarily displayed on the 788T Main LCD
display.
When connected, the CL-9 takes over control of the Master and Aux Track levels. The 788T Master
Gain Levels Window is still accessible, but track level adjustment from the 788T is locked out. This
prevents any discrepancy between actual track level and the physical position of the Master Gain
Level Control.
The CL-9 Master Gain Level Controls can be linked as stereo pairs in the 788T Master Gain Levels
Window. The master stereo pair is linked when both the L and R boxes are highlighted, and the Aux
tracks are linked when both the X1 and X2 boxes are highlighted. For example, the following image
indicates that the Left and Right Tracks are linked as a stereo pair and the Aux tracks are not.
Hardw
are Controllers
10
788T/788T-SSD User Guide and Technical Information
131