Sound Devices 788T - Manual (Page 161)

# Setup Name Description Options
Factory
Default
42. File: Copy Flag Reset
Selects whether the flag bit is cleared
or not on files copied from one media
to another.
• Disabled
• Enabled
Enabled
43. TimeCode: Frame Rate
Sets the time code frame rate. All
common time code frame rates are
available.
• 23.976
• 24
• 25
• 29.97
• 29.97DF
• 30
• 30DF
• 30+
30
44. TimeCode: Mode
Sets the mode for the time code
generator
• Off
• Free Run
• Free Run - Jam Once
• Record Run
• 24 Hr Run
• Ext TC
• Ext TC/cont
• Ext TC-Auto Record
• Ext TC/cont-Auto Record
• Freerun - Auto Output Mute
Free Run
45. TimeCode: Hold Off
Sets the duration that a valid time
code signal has to be recognized by
the 788T before generating a new
take while in Ext TC-Auto Record and
Ext TC/cont-Auto Record modes.
0.0 to 8.0 seconds adjustable in increments of
.1 seconds
2.0 sec
46. TimeCode: User Bits
Sets the time code user bits gener-
ated by the 788T.
mm – month
dd – day of week
yy – year
tt – take number
uu – user-defined
• Not Used – user bits are not set or output
• mm:dd:yy.tt
• dd:mm:yy.tt
• uu:uu:tt:tt – user bits are set to 4 user defin-
able digits with 4 take digits
• uu:uu:uu:uu
• tt:tt:tt.tt – user bits are set to the take coun-
ter for all 8 digits
• mm:dd:yy:uu
• dd:mm:yy:uu
mm:dd:yy.tt
47. TimeCode: Jam Menu
Allows the user to jam or edit the
internal time code generator and user
bits. (Also accessible by pressing
HDD and MENU keys simultane-
ously). • Jam RX TC
• Jam Zeros
• Jam Value
• Edit Value
• Edit U-Bit
48. TimeCode: Display Mode
Selects the source of the large
numerical display. • Big A-time
• Big time code
Big A-time
49. Output: Routing
Allows the routing of any combination
of tracks or any combination of inputs
to any output.
• Input 1
• Input 2
• Input 3
• Input 4
• Input 5
• Input 6
• Input 7
• Input 8
• Track L
• Track R
• Track A • Track B
• Track C
• Track D
• Track E
• Track F
• Track G
• Track H
• Track X1
• Track X2
• HP Mix Left
• HP Mix Right
Output 1 = Track L
Output 2 = Track R
Output 3 = Track A
Output 4 = Track B
Output 5 = Track C
Output 6 = Track D
50. Output 1: Delay
Delays the signal at the specified
output. Selectable from 0 to 10.0 frames in .1 frame
increments.
0.0 frames
51. Output 2: Delay
Se
tup and Shor
tcut R
eference
11
788T/788T-SSD User Guide and Technical Information
153