Sound Devices 788T - Manual (Page 157)

# Setup Name Description Options
Factory
Default
7. Rec: Media Select
Selects the storage media used for
recording. Media is selectable even
if it is not present. The 788T will only
record to 2 media when recording 9+
tracks. • INHDD Only
• CF Only
• EXHDD Only • INHDD and CF
• EXHDD and INHDD
• EXHDD and CF
• EXHDD and INHDD
and CF
EXHDD and
INHDD and CF
8. Rec: Scene Name/Number
User-defined, alpha-numeric file
scene names can be pre-set and
selected from a list. Scene name lists
can be saved to the internal drive.
Up to 9 alpha-numeric characters
can be entered for the scene name.
Scene name can also be left blank.
• <None>
• <Add New Entry>
• <Load List From INHDD>
• <Save List From INHDD>
None
9.
Rec: Scene Increment
Mode
Selects which format the scene incre-
ments will use. To quickly increment a
scene name press and hold the Stop
key then press Fast Forward.
• Disabled
• Character (A,B,C...)
• Numeric (1,2,3...)
Character
10. Rec: Track Names
Allows user to give tracks more
descriptive names, which show up in
iXML and bEXT metadata.
• MixL
• MixR
• TrkA
• TrkB
• TrkC
• TrkD
• TrkE
• TrkF
• TrkG • TrkH
• Aux1
• Aux2
• Mix
• Boom
• <Add New Entry>
• <Load List From INHDD>
• <Save List From INHDD>
Track L = MixL
Track R = MixR
Track A = TrkA
Track B = TrkB
Track C = TrkC
Track D = TrkD
Track E = TrkE
Track F = TrkF
Track G = TrkG
Track H = TrkH
Track X1 = Aux1
Track X2 = Aux2
11. Rec: Remote Track Naming
Enable or disable track names from
a C.Link master unit to change track
names on this unit.
• Disabled
• Enabled
12. Rec: Take Name/Number
Numeric, auto-incrementing number
used for take identification. <selectable alpha character + integers up to
32000, with or without preceding 0’s>
T01
13. Rec: Take Reset Mode
Defines when take numbers are reset.
Reset brings take number to <1>.
• Never - take numbers do not reset
• When scene is changed - take resets when
scene name is changed
• When daily folder changes - takes reset on
new day
• Either scene or daily - takes reset on either
change
Either scene or
daily
14. Rec: Pre-Roll Time
Sets the amount of time that is re-
corded prior to pressing the REC key.
• 0–10 sec. @ 48 kHz
• 0–5 sec. @ 88.2 kHz and above
• 0-2 sec. @ 176.4 kHz and above
2 Seconds
15. Rec: Timer Start
Sets a specific start time/date for
unattended recording. Unit must be
powered.
<enter time, date> (disabled)
16. Rec: Timer Stop
Sets a specific time/date to stop
recording. May be used with or
without the Rec: Timer Start. May
be set before the Timer Start time to
temporarily stop recording and then
resume recording with Timer Start.
<enter time, date> (disabled)
17. Rec: Record Indicator
Sets how the large display looks
when the unit enters record.
• Normal Numbers
• Reverse Numbers
• Flash Numbers
Normal Numbers
Se
tup and Shor
tcut R
eference
11
788T/788T-SSD User Guide and Technical Information
149