Sound Devices 788T - Manual (Page 63)

Metadata edits performed in the Take List are applied across all connected media on which the take
resides.
The File Viewer (Drive Directory) is accessed by pressing the soft DRV (HDD) key from within the Take
List or via the Setup Menu option FILE: VIEW FILES.
Refresh Take Metadata
During power up, the 788T automatically loads the metadata for the last 100 fi les (mono and poly)
recorded. “Building List” will be displayed if the Take List is entered while the fi rst 100 fi les are
loading. Takes containing fi les beyond the most recent 100 fi les will need to be loaded manually by
pressing the soft REFRESH (Play) key.
Take Edit Menu
From this menu, the user can perform the following edit operations while the recorder is in Standby
or Record modes:
• Notes *
• Rename
• Circle *
• Project
• Scene *
• Take *
• Tape (Roll) • Set Copy Flag
• Clr Copy Flag
• Delete (sends fi le to the Trash /Post-
record only)
• Load Settings
• Rename Tracks
* When Notes, Circle, Scene, or Take are edited on a C.Link master unit with Setup Menu option
CONNECTION MODE
set to C-LINK METADATA SHARING, this metadata will also be changed for the
corresponding take on the C.Link slave unit. see C.Link Metadata Sharing
Follow these steps to access the Take Edit Menu.
1. Enter the Take List by pressing the HDD key.
2. Choose any Take from the Take List.
3. Press the soft Edit (PLAY) key to enter the Take Edit Menu.
R
ecording and Playbac
k
5
788T/788T-SSD User Guide and Technical Information
55