Connector pin assignments, Speciﬁ cations 12, Other – Sound Devices 788T User Manual

Page 171: Dimensions and weight

Advertising

Other

Tone Oscillator

100 Hz–10 kHz, variable output, assigned to tracks or outputs (menu-selectable)

Dimensions and Weight

Size

45 mm x 257 mm x 163 mm (H x W x D)
1.8” x 10.1” x 6.4”

Mass

unpackaged: 1.7 kg, (3 lbs 12 oz.) without battery

Connector Pin Assignments

Connector Pin

Assignments

Notes

XLR
Analog Inputs 1-4

1 – ground
2 – signal (+)
3 – signal (-)

3.3k ohm input impedance, Mic- and Line-level active-
balanced

TA3M
Analog Inputs 5-8

1 – ground
2 – signal (+)
3 – signal (-)

3.3k ohm input impedance, Mic- and Line-level active-
balanced

TA3M
Analog Outputs 1-4

1 – ground
2 – signal (+)
3 – signal (-)

200 ohm output impedance, active balanced.
For unbalanced connection, pin-1 ground, pin-2 (+)
positive, float pin-3. Mates with Switchcraft TA3F-type
connector.

3.5 mm
Analog Output 5,6

tip – signal Ch5
ring – signal Ch6
sleeve – signal ground

Mates with 3.5 mm TRS jack. Signal is unbalanced.

TA3M
AES Outputs 1-4

1 – ground
2 – signal (+)
3 – signal (-)

Mates with TA3F-type connectors., 110 ohm, transformer-
balanced

3.5 mm
Headphone

tip – signal L
ring – signal R
sleeve – signal ground

Mates with 3.5 mm TRS jack.

1/4-inch Female
Headphone

tip – signal L
ring – signal R
sleeve – signal ground

Mates with 1/4-inch TRS jack.

5-pin LEMO
Time code

1 – ground
2 – SMPTE TC In
3 – ASCII in/out
4 – tuning out
5 – SMPTE TC out

LEMO B-series connector, pin assignments as viewed on
panel-mounted connector

Sync Input