Sound Devices 788T - Manual (Page 44)

5. The image below indicates that Input 1 is now routed to Track L post fade and
Track A pre fade. Once changes have been made, the sett ings will be saved in the
INPUT: TRACK ROUTING
Setup Menu option under the “Edited” routing selection.
6. To exit Input to Track Routing press the Play key.
7. The new track assignments will be visible from the Input Sett ings Window.
Routing Using the Setup Menu
Press and hold STOP then press the INPUT key to bring up the following menu. This menu can also
be accessed via the Setup Menu option INPUT: TRACK ROUTING.
Continue to hold down the Stop key then press the INPUT key to cycle through the preset
input-to-track routing combinations. These presets are factory set and cannot be changed. The last
three preset selections are CUSTOM ROUTE options. Press the EDIT soft key to enter the custom rout-
ing menu. Custom routing allows any input to be assigned to any track. In the menu, highlighted
input and track combination are displayed in white text. The eight inputs are shown on the left; the
twelve tracks are shown on the right. Tracks can be assigned as pre or post fade, when the given
track is highlighted press the Play key to toggle between pre and post fade assignment.
788T/788T-SSD User Guide and Technical Information
36
v. 3.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
R
outing and Mixing
4