Sound Devices 788T - Manual (Page 82)

To edit a custom headphone routing:
1. Enter the HP: MONITOR MODES Setup Menu option. Once you enter the Monitor Modes menu
you will immediately be in slot-1 of the routing matrix.
2. Press the Rotary Switch or the soft key ENTER (Tone) key to move to the next slot. Repeat this
action until you have highlighted the slot you wish to set as a custom heaphone routing.
3. Turn the Rotary Switch to select any of the editable headphone routings, which are titled
USER and followed by a number from 1 to 10.
4. Push the Edit (Fast Forward) key to enter the Headphone Monitor Editing screen.
5. Turn the Rotary Switch or use the Fast Forward and Rewind keys to move the highlighter.
Push the Play butt on or the Rotary Switch to assign or unassign the highlighted source to the
channel.
6. When all routings are complete, push Enter (Tone) to exit the Headphone Monitor Editing
Screen and return to the Monitor Modes menu.
7. Once all sources have been chosen, select DONE and press ENTER. This will exit the head-
phone monitor mode setup. You can exit the selection process by pressing the Stop key or
cancel (LCD Backlight) key at any time.
Assigning any track to a monitor channel will unassign all inputs from that channel. Inversly, assigning
any input to a channel will unassign all tracks from that channel.
Headphone Source as Outputs
The left and right program of the headphone monitor can be selected as an output source. This al-
lows the user to send the selected headphone monitor source to third party devices. Output muting
and the Headphone Volume control have no effect on the signal at the outputs. Headphone program
is sent to the outputs before the CL-9 is introduced in the signal path.
Input Solo (PFL)
Inputs are quickly soloed (pre fade listen) in headphones by pressing its corresponding Input Selec-
tor Switch. This will latch on the Input Settings Window and solo the input in the headphone moni-
tor. To exit the Input Settings Window and return to the last headphone monitor program, press the
selected Input Selector Switch again.
If momentary action is desired, press and hold the Input Selector Switch for one second or longer.
If the Input Selector/Solo Switch is held for 5 or more seconds “Hold” will appear on the screen
and the soloed input will remain in the headphone monitor until either another headphone monitor
mode has been selected with the Rotary Switch or with the Input Selector/Solo Switch. If it is desired
to access the Input Settings Window without soloing the input, disable the PFL function in the Setup
Menu option INPUT: PFL FUNCTION.
When a CL-8 is attached a user can quickly solo an input by pressing the A and B buttons from the
CL-8 Main View.
See CL-8 for more details.
788T/788T-SSD User Guide and Technical Information
74
v. 3.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Monitoring and Me
tering
7