Sound Devices 788T - Manual (Page 51)

To assign tracks-to-media perform the following steps.
1. Enter the Track Setup Window by pressing the INPUT key.
2. Press the soft MEDIA (Fast Forward) key to enter the Track-to-Media View.
3. Use the Rotary Switch to navigate through the track-to-media routing. If media is displayed
the corresponding track will be writt en to that media, that is, if the media has been selected in
the Setup Menu and the track is armed. In the illustration above, the external hard drive will
only write Tracks L and R.
4. Press in on the Rotary Switch to toggle the routing status of a media.
Master Gain Levels
The master gain levels are controlled independently for the Left, Right, X1, and X2 Tracks. The Left
and Right tracks and the X1 and X2 Aux Tracks can be linked, allowing one level control for both
tracks of the pair. Levels are adjustable from -60 to +15 dB in .1 dB increments. The master gain level
is applied to the Tracks prior to recording. This allows the Sound Mixer to adjust the overall mixed
signal of all summed inputs routed to these tracks. Follow these steps to adjust the master gain level.
1. Press the INPUT key to access the Track Setup Window.
2. Press the soft Levels (Play) key to access the Master Gain Levels View.
R
ecording and Playbac
k
5
788T/788T-SSD User Guide and Technical Information
43