Sound Devices 788T - Manual (Page 20)

Right Panel Connectors and Controls
MENU
SELECT 1 2 3
4 5,6 UNBAL
ANALOG BAL LINE OUTS FW800 FW400 USB
BAL AES
OUT
1,2 3,4 TIMECODE
SYNC
WORD / VID IN
DC IN
10-18V
PIN 4
PIN 1
( )
( )
+
-
WORD OUT
1 3 4 5 6 2 7
8 9 10 11 12
1) Rotary Switch
When in the Setup Menu, the rotary
switch moves between menu selections;
push to enter selection or enter data.
In Record and Playback modes, selects
headphone monitor source; press action is
user selectable. Turn the knob while hold-
ing the LCD Backlight key to adjust the
brightness of LEDs.
2) TA3 Analog Outputs 1-4
Active-balanced, analog outputs 1-4.
Program source and attenuation levels are
user selectable. Pin-1 ground, pin-2 (+),
pin-3 (
– ). When connecting to an unbal-
anced input, do not connect pin-3.
3) FireWire 800 (IEEE-1394b) Port
Connection to a computer (Mac OS, Win-
dows) to access the internal hard drive
and CompactFlash volumes as mass stor-
age devices. Also used to attach external
FAT32-formatted FireWire drives to the
788T for direct recording and copying.
4) FireWire 400 (IEEE-1394a) Port
Connection to a computer (Mac OS, Win-
dows) to access the internal hard drive
and CompactFlash volumes as mass stor-
age devices. Also used to attach external
FAT32-formatted FireWire drives to the
788T for direct recording and copying.
5) USB-B Port
Connection to a computer (Mac OS, Win-
dows) to access the internal hard drive
and CompactFlash volumes as mass stor-
age devices or for extended display and
control of the 788T using Wave Agent.
See
Wave Agent for details.
6) Sync Input
This BNC is used to connect an external
video sync or word clock reference signal
for word clock purposes. Accepts NTSC,
PAL, and Tri-level video syncs as well
as word clock rates between 32 kHz and
48.048 kHz.
7) External DC In
Accepts power from 10–18 volts DC to
power and charge the Li-ion battery.
Hirose 4-pin connector is wired pin-1
negative (-), pin-4 positive (+). Pin-2 and
pin-3 are not connected. Charging charac-
teristics are set in the Setup Menu.
8) Headphone Output
1/4-inch and 3.5 mm TRS stereo head-
phone connectors. Can drive headphones
from 8 to 1000 ohm impedances to very
high levels. Tip = left, ring = right, sleeve
= ground.
9) Analog Output 5-6
Unbalanced output on 3.5 mm TRS stereo
connector. Program source and attenua-
tion levels are user selectable. Tip = Ch5,
ring = Ch6, sleeve = ground.
10) AES3 Output 1-2 and 3-4
Transformer-balanced AES3 digital out-
puts 1-2 and 3-4. Program source is user
selectable.
11) Time Code Multi-Pin
Time code input and output on 5-pin
LEMO
® connector.
12) Word Clock Output
Provides a word clock output running at
the sample rate of the 788T.
788T/788T-SSD User Guide and Technical Information
12
v. 3.02 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
P
anel and L
CD Descriptions
2