Hardw are controllers 10, Cl-9 rear panel descriptors, Cl-9 fader control – Sound Devices 788T User Manual
Page 138
20)
Pan/User 3 Button
Press to enter Pan Mode. Press shift
then PAN Button to enter User 3 as
defi ned in the Setup Menu option
CL-9: USER 1-4 ASSIGN
.
See Pan Mode.
21)
EQ Gain/User 2 Button
Press to enter EQ Gain Mode. Press shift
then EQ GAIN Button to enter User 2
as defi ned in the Setup Menu option
CL-9: USER 1-4 ASSIGN
..
See EQ Gain
Mode.
Press EQ GAIN and EQ FREQ But-
tons together to enter Q-Factor Mode.
See
Q-Factor Mode.
22)
EQ Frequency/User 1 Button
Press to enter EQ Frequency Mode. Press
shift then EQ FREQ Button to enter User
1 as defi ned in the Setup Menu op-
tion CL-9: USER 1-4 ASSIGN..
See EQ
Frequency Mode.
Press EQ GAIN and EQ
FREQ Buttons together to enter Q-Factor
Mode.
See Q-Factor Mode.
CL-9 Rear Panel Descriptors
1
2
3
4
5
6
7
1)
788T USB-B Input
For CL-9 operation and power, connect
to the 788T’s rear panel KEYBD USB-A
connector.
2)
USB Keyboard Input
USB-A female connector for USB key-
boards. This acts as a thru port to the
788T USB Keyboard Input, which is
used to connect the CL-9 to the 788T.
This connector allows for simultaneous
keyboard and CL-9 use.
3)
XLR RTN 1
Active-balanced analog line-level input
for return monitoring. Pin-1 ground,
pin-2 (+), pin-3 (
).
4)
XLR RTN 2
Active-balanced analog line-level input
for return monitoring. Pin-1 ground,
pin-2 (+), pin-3 (
).
5)
788T Headphone Input
1/4-inch TRS stereo unbalanced jack.
For connecting the 788T Headphone
Output to the CL-9. Tip = left, ring =
right, sleeve = ground.
6)
Line-Level Headphone Output
1/4-inch TRS stereo unbalanced jack,
line-level output. Program is identical
to the CL-9’s front panel Headphone
Outputs. Tip = left, ring = right, sleeve =
ground.
7)
Footswitch Input
1/4-inch TRS jack with two GPI
lines. Used to trigger select 788T
functions. Functionality is as-
signed in the Setup Menu option
KEYBOARD/LOGIC IN: ASSIGN
.
CL-9 Fader Control
The eight 100 mm faders control the fader level of the eight inputs. Faders only have effect on an
input when it is being sent to a track post-fade.
788T/788T-SSD User Guide and Technical Information
130
v. 3.02
Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Hardw
are Controllers
10