Sound Devices 788T - Manual (Page 43)

Without a CL-2, CL-8, or CL-9 attached and with the front panel gain controls set to Trim Controls,
fader levels are fi xed at unity gain.
Routing Using the Input Settings Window
The Input to Track Routing in the Input Settings Window allows the user to quickly view and edit
the input-to-track routing for the selected input. The highlighted selections indicate the tracks that
the input is currently routed to. In order to record, tracks must be record enabled in the Track Setup
Menu.
To edit track assignments:
1. Enter the Input Sett ings Window using the Input Selector Switch. The image below indicates
that Input 1 is currently assigned to Track L.
2. To make edits to the input to track assignments press the Play key.
3. Route or un-route the input to Track L and Track R by pressing the Rewind and Fast-Forward
keys respectively. Route or un-route the input to Tracks A-X2 using the Rotary Switch. Scroll
through the assignable tracks by turning the rotary switch. To route or un-route the input to
tracks, press in on the rotary switch.
4. Inputs can be sent to tracks pre or post fade. To toggle between the pre- and post-fade sett ing,
press and hold the Rotary Switch. If the Track has a line above it is set as post-fade, if the
Track has a line below it is set as pre-fade. Pre- and post-fade assignments are applied to all
inputs routed to that track.
R
outing and Mixing
4
788T/788T-SSD User Guide and Technical Information
35