Rice Lake FC-i/Si Series, A&D Weighing - Manual (Page 39)

‰ Display ON Unit Weight – Reset or Last.
When the display is turned on, the scale can be set to recall
the last unit weight used.
0
 The unit weight is RESET (cleared) when display comes on.
1
The unit weight last used (before display is turned off, not
power interrupt) will be entered automatically.
‰ ID Memory Contents.
The scale ID memory can contain unit weights with tare
weights, comparator limits and total count, or just unit
weights alone. Item codes are always contained.
000
 ID memory contains the unit weight and item code only.
You select which data to be stored by keying in a
0 or 1 for the data: tare weight, comparator
limits or total count.
Example: Key in
0 1 0 to display
010, ID
memory contains the unit weight including item
code and comparator limits.
‰ Unit Weight With A 2 Scale System.
When operating a 2 scale system, the remote scale may
have an independent unit weight, or restricted to the same as
the main scale.
0
Each scale can have its own unit weight.
1
 Main and remote scales have the same unit weight only.
f-01-04
f-01-06
F-01-06 requires
OP-05 and a
remote scale
f-01-05
000
Comparator
limits
TOTAL TARE
count Weight