Rice Lake FC-i/Si Series, A&D Weighing - Manual (Page 64)

13. OPTIONS
13-1. OP-01 Bar Code Reader
The OP-01 includes a bar code reader, RS-232C cable, AC adapter (100V~240V),
power plug adapter (US to European plug) and a setting-up bar code sheet.
‰ The OP-01 bar code reader can be connected to one of the RS-232C interfaces. It
can read bar codes for the ID number, unit weight, tare weight and comparator
limits.
‰ When the bar code reader reads the ID number, the scale will recall unit weight
from ID memory instead of by using the ID key.
‰ Set the F-Function f-06/07/08-01="5" to use a bar code reader.
For example, to use Ch.1 (PORT 1), set
f-07-01="5".
Refer to “12-6. Using a Bar Code Reader” about the bar code data and prepare bar
code labels.
‰ The OP-01 bar code reader can be connected to one of the RS-232C interfaces. It
can read bar codes for the ID number, unit weight, tare weight and comparator
limits.
TRIGGER switch
Triggers the bar code
scanner.
Buzzer
Beeps on successful
read and decode.
Cable interface port
for cable connecting.
LED
Indicates RED
as standby position.
Indicates GREEN on
successful read.
Scanner Window
Emits light to
read bar code.
• Aim the scanner at the barcode and press the trigger.
• Ensure the scan line crosses every bar and space.
• Do not hold the scanner directly over the barcode.
• Maximum reading distance is approx. 15 mm (6 inches).
WRONG
01123456
01123456
RIGHT