Rice Lake FC-i/Si Series, A&D Weighing - Manual (Page 61)

12-7. Using UFC (Universal Flex Coms) Function
‰ The UFC function allows you to print out as you format the printer (UFC format).
‰ The scale can store the UFC format as text data. It will include parameters to
replace with the count data, weight data and so on.
‰ The maximum number of text data is 384 characters.
‰ Using “PF” command, the text data has to be sent to the scale in advance.
When the PRINT key is pressed or by auto-print mode A/B, the scale will send
the stored text data with the parameters replaced by the original data.
‰ Terminator for the “PF” command is "C
R
" or "C
R
L
F
".
‰ The UFC format data can be sent through one RS-232C interface only.
Set one of
f-06/07/08-01 at "6", "7" or "8" to send the data. The others must be set
at "
0" ~"5" ("4" will be recommended if the other format data is not necessary to
send).
Store Text Data into the Scale Memory
Command P F , $ P C , ‘ T E X T ‘ , # 2 0 , $ S P 2 , &
$ C R , $ L F , $ W T , $ C R , $ L F C L
F
Terminator
Reply AK
The “PF” command sends text data that will include:
‰ Parameters for the scale data and control codes
Parameter Data & Code Parameter Data & Code
$PC Count $CP Comparator result
$WT Weight $DT Date
$UW Unit weight in use $TM Time
$TR Tare weight in use $CM Comma
$TL Total count $SP Space
$AN Accumulation numbers $CR Carriage Return
$CD ID number in use $LF Line Feed
$NM Item code in use
These parameters must be used capital letters.
‰ ASCII text string
Text string is described in single quote marks as ‘Data’.
The single quote itself is written as ’’(2 single quotes).
Example: Text ‘ABC’ is described as ‘’’ABC’’’.
‰ The ASCII hexadecimal code
The ASCII hexadecimal codes are written in the form “#" + 2 hexadecimal digits.
This will mainly be used to send control codes that can’t be described as a text string.