2 storing units – Rice Lake FX-i WP Series, A&D Weighing User Manual
Page 17
15
4-2 Storing Units
The units or modes can be selected and stored in the function table. The sequence of displaying the
units or modes can be arranged in the function table so as to fit the frequency of use.
Select a unit or mode and arrange the sequence of display as follows:
1 Press and hold the
SAMPLE
key until ba5fnc of the
function table is displayed.
2 Press
the
SAMPLE
key several times to display
Unit .
3 Press
the
key to enter the unit selection mode.
4 Specify a unit or mode in the order to be displayed using the
following keys.
SAMPLE
key
To sequentially display the units.
RE-ZERO
key To specify a unit or mode. The stabilization
indicator appears when the displayed unit or
mode is specified.
5 Press
the
key to store the units or modes. The balance
displays end and then displays the next menu of the function
table.
6 Press
the
CAL
key to exit the function table. Then the balance
returns to the weighing mode with the unit specified first in step 4.
Notes
When the power is turned on, the scale displays the unit specified first in step 4.
In the weighing mode, to select a unit or mode for weighing, press the MODE key.