Rice Lake FX-i WP Series, A&D Weighing - Manual (Page 71)

69
19. SPECIFICATIONS
FZ-120 i WP FZ-200 i WP FZ-300 i WP FZ-1200 i WP FZ-2000 i WP FZ-3000 i WP
Weighing capacity 122 g 220 g 320 g 1220 g 2200 g 3200 g
Maximum display 122.084 g 220.084 g 320.084 g 1220.84 g 2200.84 g 3200.84 g
Minimum weighing value (1 digit) 0.001 g 0.01 g
Repeatability (Standard deviation) 0.001 g 0.01 g
Linearity ±0.002 g ±0.02 g
Stabilization time (typical at FAST) Approx. 1 second
Sensitivity drift
(10°C to 30°C / 50
°F to 86°F)
±2 ppm/°C
±0.010 g ±0.10 g ±0.15 g
Accuracy right after calibration using the
internal mass. See notes below
* The value above is to the weighing capacity.
Clock function Buit-in clock
Operating environment 5°C to 40°C (41°F to 104°F), 85%RH or less (No condensation)
Display refresh rate 5 times/second, 10 times/second or 20 times/second
Minimum unit mass 0.001 g 0.01 g Counting
mode
Number of samples 5, 10, 25, 50 or 100 pieces
Minimum 100% reference mass 0.100 g 1.00 g Percent
mode
Minimum 100% display 0.01%, 0.1%, 1% (Depends on the reference mass stored.)
External calibration weight
100 g
50 g
200 g
100 g 300 g
200 g
100 g 1000 g
500 g
2000 g
1000 g 3000 g
2000 g
1000 g
Weighing pan diameter 130 mm 150 mm
Net weight Approx. 3.2 kg
External dimensions 193 (W) x 262.5 (D) x 84.5 (H) mm
AC adapter
Confirm that the adapter type is correct for the local voltage and power
receptacle type
Power consumption Approx. 11VA (supplied to the AC adapter)
Interface RS-232C
Dust and water protection Complying with IP65
* Accuracy right after calibration using the accessory small breeze break and the internal mass,
in good ambient conditions (within the temperature range of 10
°C to 30°C (50°F to 86°F) with
no abrupt changes in temperature or humidity, no drafts, no vibration and no effect by
magnetic fields or static electricity).
With the FZ-iWP series balance, the environment and passing age may cause internal mass
value error. Calibrate using an external mass and perform maintenance.