Rice Lake FX-i WP Series, A&D Weighing - Manual (Page 55)

53
11. UNDERHOOK
The underhook can be used for magnetic materials or density measurement. The built-in underhook is
revealed by removing the plastic cap on the bottom of the balance.
Use the underhook as shown below.
Caution
Do not apply excessive force to the underhook.
When the underhook is not in use, attach the plastic cap to prevent dust from getting into the
balance.
The cap was sealed to the bottom of the balance using a special adhesives to be dust-tight
and protected against water jets. The balance does not comply with IP65 once the cap has
been removed, .
Underhook
Cap
Bottom of the balance