Rice Lake FX-i WP Series, A&D Weighing - Manual (Page 28)

26
5-5-2 Using The Statistical Calculation Mode
1 Press
the RE-ZERO key to set the display to zero.
2 Place a container on the weighing pan.
Press
the PRINT key to cancel the weight (tare).
The balance displays 0.00 g. (Storing the tare value)
The tare value data is output when the peripheral output
equipment is connected.
3 Weigh formula 1 and press the
PRINT key. The
balance displays 0.00 g. (Storing the weight value of
formula 1)
The weight value data is output when the peripheral
output equipment is connected.
4 Weigh formula 2 and press the
PRINT key. The
balance displays 0.00 g. (Storing the weight value of
formula 2)
The weight value data is output when the peripheral
output equipment is connected.
5 When there are some more formulae to be added,
repeat step 4.
6 After mixing is complete, press the MODE key to
display the statistical results.
7 Press the PRINT key to output the number of
data saved including the tare value and the total
weight.
Output example