Commands, 1 command list, Commands to query weight data – Rice Lake FX-i WP Series, A&D Weighing User Manual

Page 61: Commands to control the balance

Advertising
background image

59

15. COMMANDS

15-1 Command List

Note
A command has a terminator added, that is specified using the "Terminator (
Crlf)" parameter of
“Serial interface (
5if )” in the function table, and is sent to the balance.

Commands to query weight data

C Cancels

the

S or SIR command.

Q

Requests the weight data immediately.

S

Requests the weight data when stabilized.

SI

Requests the weight data immediately.

SIR

Requests the weight data continuously.

E

SC

P

Requests the weight data when stabilized.

Note: The “Q” and “SI” commands, the “S” and “

E

SC

P” commands behave the same.

Commands to control the balance

CAL

Same as the CAL key

OFF

Turns the display off.

ON

Turns the display on.

P

Same as the ON:OFF key

PRT

Same as the PRINT key

R

Same as the RE-ZERO key

SMP

Same as the SAMPLE key

T

Tare key

Z

Same as the RE-ZERO key

E

SC

T

Same as the RE-ZERO key

U

Same as the MODE key

?ID

Requests the ID number.

?SN

Requests the serial number.

?TN

Requests the model name.

?PT

Requests the tare weight.

PT:

∗∗∗∗∗.∗

g

Changes the tare weight.
The unit added is the current weighing unit in A&D standard format.

Note: The “R”, “Z” and “

E

SC

T” commands behave the same.

E

SC

: ASCII code 1Bh


Advertising