Rice Lake IQ 700 Configurable Weight Indicator - Manual (Page 59)

Setpoints 55
Mode C Setpoint with dribble control
Dribble control provides two-speed cutoff (fast or slow feed) to enhance accuracy. Cutoff occurs
when WT≥ SP – dr – Pr.
Use the following steps to set Mode C setpoint values.
1. Press SETPOINT 1 or SETPOINT 2 on front panel.
2. Enter desired setpoint value, (display times out if no number is entered for several
seconds).
3. Press ENT . Display flashes number value alternated with dr.
4. Enter desired dribble value, then press ENT key. Display returns to normal operation.
5. The setpoint value can be recalled any time by pressing the appropriate setpoint twice.
SP1
SP1-Dr
SP2
SP2-dr
Mode D Setpoint with preact and dribble control
Slow feed cutoff occurs when WT ≥ SP – Pr. Fast feed cutoff occurs when WT ≥ SP – Pr – dr.
Use the following steps to set Mode D setpoint values.
1. Press SETPOINT 1 or SETPOINT 2 on front panel.
2. Enter desired setpoint value, (display times out if no number is entered for several
seconds).
3. Press ENT . Display flashes number value alternated with Pr.
4. Enter the desired preact value; then press ENT key.
5. Enter the desired dribble value; then press ENT key.
6. The setpoint value can be recalled any time by pressing the appropriate setpoint twice for
preact and a third time for dribble value.
SP1-Pr
SP1-Pr-dr
SP2-Pr
SP2-Pr-dr
Mode Description Setpoint
100 90 80 70 60 50 40 30 20 10 0
SP1-dr SP2
WEIGHT
MODE C
WIRE
PLACEMENT
TB3 - 5
TB3 - 4
TB3 - 3
TB3 - 2 SP1 SP2-dr
SP1-Pr
-dr
SP2-Pr
MODE D
WIRE
PLACEMENT
TB3 - 5
TB3 - 4
TB3 - 3
TB3 - 2 SP1-Pr SP2-Pr
-dr
100 90 80 70 60 50 40 30 20 10 0
WEIGHT