Rice Lake Sartorius Midrics 1 and 2 Series - Operating Instructions - Manual (Page 13)

13
Activating the Service Mode
e
Switch the device on and immediately (during the initialization of the device) press ...
)
... briefly to display the menu
k k
Select the Setup menu item
)
Confirm the setup menu item 1 )
k
Select the code menu item
(press key k until the code appears on the display)
)
Confirm the code menu item and enter the service password (see Appendix)
Use keys ( ) k p
)
Saving the service password
When the service mode is activated an “S”appears in the top right-hand corner of the
display.
(
Return to “Code” in the service mode.
(
Return to “Setup” in the service mode.
1 ) If a password is requested at this point, enter the service password (see Appendix) and
continue once the service password has been accepted.
setup
wp-1
code
code