Rice Lake Sartorius Midrics 1 and 2 Series - Operating Instructions - Manual (Page 44)

44
Setup
uniCom1 3
Second interface (optional)
Printer
Printer configuration
YDP01IS YDP01IS
line * Strip printer
label Label printer
lab ff Label printer with manual feed
YDP02 YDP02
5.1. through 5.4.
Numeric menu as for COM1
YDP03 YDP03-0CE
5.1. through 5.4.
Numeric menu as for COM1
YDP02IS YDP02IS
line * Strip printer
label Label printer
Uni-pri Universal interface
5.1. through 5.6.
Numeric menu as for COM1
YDP04IS * YDP04IS
line * Strip printer
label Label printer
lab ff Label printer with manual feed
yam01is YAM01IS as electronic memory for print data
Analog Analog data output port for PLC operation
8.12. Analog output: value
8.12.1* Net value
8.12.2 Gross value
8.13. Analog output: error indicator
8.13.1* High level (20 mA)
8.13.2 Low level (0/4 mA). When menu is open or during calibration:
0/4 mA on this interface.
8.14. Analog output: mode
8.14.1* 1) Zero to maximum capacity
8.14.2 Minimum/maximum values
8.15. Analog output: min./max.
8.15.1 2) Min. (0/4 mA) input in kg
8.15.2 Max. (20 mA) input in kg
Memory
Verifiable data memory
yam01is YAM01IS external data memory
1) When setting 8.14.1 is active, analog data output only works for XBPI weighing instruments
2) not with setting 8.14.1