Appl v – Rice Lake Sartorius Midrics 1 and 2 Series - Operating Instructions User Manual
Page 35
appl
V
Averaging (Animal Weighing)
3.21.
Static display of result after load removed
3.21.1*
Display is static until unload threshold reached
3.21.2
Display is static until c is pressed
3.25.
Tare function
3.25.1*
Add input value (weight value) for taring
3.25.2
Tare value can be overwritten
9.1.
Factory settings for all application programs
9.1.1
Yes
9.1.2*
No
O
Checkweighing
3.5.
Minimum load for automatic taring and automatic printing
Numeric menu as for Weighing
3.6.
Minimum load for initialization
Numeric menu as for Counting
3.7.
Automatic taring: first weight tared
3.7.1*
Off
3.7.2
On
3.8.
Start application and load most recent application data when the Midrics is switched on
3.8.1
Automatic (on)
3.8.2*
Manual (off)
3.25.
Tare function
3.25.1*
Add input value (weight value) for taring
3.25.2
Tare value can be overwritten
4.2.
Checkweighing range
4.2.1*
30 to 170%
4.2.2
10% to infinity
4.3.
Activate control line for “Set” as:
4.3.1*
“Set” output
4.3.2
Ready to operate (for process control systems)
4.4.
Activation of outputs
4.4.1
Off
4.4.2
Always active
4.4.3
Active at stability
4.4.4*
Active within checkweighing range
4.4.5
Active at stability within the checkweighing range
4.5.
Parameter input
4.5.1*
Min, max, target
4.5.2
Only target with percent limits
4.6.
Automatic printing
4.6.1*
Off
4.6.2
On
4.6.3
Only values within tolerance
4.6.4
Only values outside tolerance
4.7.
Checkweighing towards Zero
4.7.1*
Off
4.7.2
On
9.1.
Factory settings for all application programs
9.1.1
Yes
9.1.2*
No
W
Classification
3.5.
Minimum load for automatic taring and automatic printing
Numeric menu as for Weighing
3.6.
Minimum load for initialization
Numeric menu as for Counting
3.7.
Automatic taring: first weight tared
3.7.1*
Off
3.7.2
On
35