Rice Lake Sartorius Midrics 1 and 2 Series - Operating Instructions - Manual (Page 94)

94
Product Order No.
COM1
RS-232 YDO01M-232
RS-232+CLOCK YDO01M-232CLK
Optional interface (UniCOM)
Interface module (RS232 + TTL) YDO01M-232CLK
Interface module (RS485) galvanically isolated YDO01M-485
Digital I/O 5/5 optoisol. YDO01M-IO
Analog power outlet, 0-20 mA, 4-20 mA, 0 up to 10 Volt, 16 bit YDA01C-20MA
Ethernet YD001M-EN
External interface adapter
Connecting cable from RS-232 data interface to USB port on PC 2) YCC01-USBM2
Electrical accessories
External red/green/red display with 12 pole, round plug (IP67) YRD14Z
connecting cable YCC02-R12F6 or option M36 required
Secondary display, connecting cable YCC02-D25F6 or option M31 required YRD02Z
Relay box to connect weighing instruments to external controls, with 4 (5) relay outputs (250 V/ 3 A) YSB01
and 1 optocoupler input (0-30V), connecting cable YCC02-RELAIS02 required
Miscellaneous:
Guard covers ( +2) YDC01SW
Cable gland for cables with diameter 4.5 to 9 mm, IP67, M16 + 1.5 YAS04CIS
Kit for installation in control panel 3) YAS03MI
Software
Sartorius WinScale Scale driver for Windows 95/98/2000/NT with display of current measured value YSW03
and verifiable PC-data memory. RS-232 connecting cable YCC-R12F6 (Option M6) required
PC program set SartoConnect for reading weighed values using a PC YSC01L
(including connecting cable Scale/PC 12/9 pin, 1.5 m)
connecting cable YCC02-R12F6 (Option M36) required
Power supply
24 Volt module YAS02MI
Battery (external, operating time 10 h, charging time 8 h) with charger YRB08Z
Connecting cable with cable gland for YRB08Z, open cable ends on 2 pin, jack plug, 0.8 m YCC02-RB03