Sample printouts – Rice Lake Sartorius Midrics 1 and 2 Series - Operating Instructions User Manual
Page 85
Sample Printouts
For details on the individual information
blocks, see “Configuring Printouts" above.
For details on configuring the header lines,
refer to the chapter describing the
particular application.
Weighing Application
There is no data for the “initialization
data" block. If this block is enabled for
the printout, a blank line is output.
HEADER LINE 1
HEADER LINE 2
14.01.2006
09:43
--------------------
G#
+
1.402 kg
T
+
0.200 kg
N
+
1.202 kg
--------------------
With weighing platform serial number:
--------------------
Ser.no.
80705337
G#
+
1.402 kg
T
+
0.200 kg
N
+
1.202 kg
--------------------
Counting Application
The “Initialization data" block contains
the reference sample quantity and refer-
ence piece weight. The “Results" block
contains gross, net and tare weights, as
well as the calculated piece count.
--------------------
nRef
10 pcs
wRef
+
0.035 kg
G#
+
1.402 kg
T
+
0.212 kg
N
+
1.190 kg
Qnt
34 pcs
--------------------
Neutral Measurement Application
The “Initialization data" block contains the
reference sample quantity and reference
weight. The “Results" block contains gross,
net and tare weights, as well as the calcu-
lated piece count.
--------------------
Ref
2 o
wRef
+
1.200 kg
G#
+
14.700 kg
T
+
0.300 kg
N
+
14.400 kg
Qnt
12 o
--------------------
Weighing in Percent Application
The “Initialization data" block contains the
reference percentage and reference weight.
The results block shows gross, net and tare
weights, as well as the percentage, which
is shown as either the loss or the residual
amount.
Percentage = residue:
--------------------
pRef
100 %
Wxx%
+
2.100 kg
G#
+
1.859 kg
T
+
0.200 kg
N
+
1.659 kg
Prc
79 %
--------------------
Percentage = loss:
--------------------
pRef
100 %
Wxx%
+
2.100 kg
G#
+
0.641 kg
T
+
0.200 kg
N
+
0.441 kg
D
21 %
--------------------
Checkweighing Application
The “Initialization data" block contains
the nominal, minimum and maximum
weights. The “Results" block always
contains the gross, net and tare
weights. The other results can be dis-
played in one of two ways:
– Weight display
The deviation from the nominal weight
is given both as a percentage and as an
absolute (weight) value, whether the
result lies within the “OK" range or not.
– Result = Threshold status:
If the result lies within the tolerance
limits, the printout shows the deviation
from the nominal weight both as
a percentage and as an absolute
(weight) value, just as in the “Weight"
printout mode described above.
If the result is outside the tolerance
limits, the last line of the printout
indicates the status as follows:
Result in within limits; “Weight"
or “Threshold" printout:
--------------------
Setp
+
1.300 kg
Min
+
1.235 kg
Max
+
1.365 kg
G#
+
1.312 kg
T
+
0.000 kg
N
+
1.312 kg
Lim
+
0.92 %
Diff.W+
0.012 kg
--------------------
Result outside limits;
“Threshold” printout:
--------------------
Setp
+
1.300 kg
Min
+
1.235 kg
Max
+
1.365 kg
G#
+
1.400 kg
T
+
0.000 kg
N
+
1.400 kg
Stat
HH
--------------------
85
85