Rice Lake Sartorius Midrics 1 and 2 Series - Operating Instructions - Manual (Page 82)

Configuring Printouts
Purpose
You can specify which data items are
included on printouts. When using the
Totalizing or Net-total Formulation
application, you can also define which
parameters are included in the “Total"
data record when the c key is
pressed.
In the Setup menu under “Printout"
you can configure an individual,
component or total data record that
contains all data items activated for the
application program currently in use.
The printout should be formatted only
after the desired application has been
configured, as some of the positions are
application-dependent.
Features
– Quantity and content of data record
lists:
6 lists, each with a length of up to
30 data items
– Individual printout, printer 1
– Component printout, printer 1
– Total printout, printer 1
– Individual printout, printer 2
– Component printout, printer 2
– Total printout, printer 2
– You can configure individual, compo-
nent and total printouts separately
– Generate an individual printout:
Press p
Automatic printout from application
when active in operating menu:
– Animal weighing/averaging
– Checkweighing
– Classification
– Generate component printout:
Totalizing/Net-total formulation:
Press the O key (Applications: Total-
izing: Printing: Component printout)
– Generate total printout:
For Totalizing or Net-total Formulation;
press the c key
– When you change application programs
in the operating menu, the selected
data record lists are deleted.
The new selection list is generated
according to the active application
programs.
– You can delete individual items
from the list
– “Form feed" item in the printout footer:
For advancing to the start of the next
label in print mode “YDP01IS: Label" or
“YDP04IS: Label: Manual form feed"
– ISO/GMP-compliant printout:
The operating menu configuration under
“ISO/GMP-compliant printout"
is also active for configured printouts.
Preparation
§ Switch on the scale: Press e
§ While all segments are lit,
press the ) key
§ Select the Setup menu: Press k
repeatedly until Setup is displayed
§ Open the Setup menu:
Press the ) key
§ Press k repeatedly until prtprot
is displayed
§ Press the ) key
prtprot (Printout; for details on menu items,
see page 46)
7
7.4 Header input
Identifier names ID1 to ID4
7.5 COM1 interface
7.6 Optional UniCOM interface
7.7 COM1 interface
Configure standard printout
(press p, O)
7.8 Configure standard printout
for optional UniCOM
interface (p, O keys)
7.9 COM1 interface
Print results when c
pressed in applications
7.10 Printout of results on
optional UniCOM interface
when c pressed in
applications
7.13 ISO/GMP-compliant printout
7.14 Date/time printout line:
Time not printed
7.15 One-time automatic
printout at stability
7.16 FlexPrint
7.17 Decimal separator
9
9.1 Factory settings
§ Press ) to save your settings and (
(repeatedly) to exit the operating menu.
82 82