Rice Lake Sartorius Midrics 1 and 2 Series - Operating Instructions - Manual (Page 24)

24
Enter Serial Number of the Weighing Platform
Click on the menu item Setup
)
Select Setup device parameters
k
Click on the menu item Code
(press key k until the code appears in the display)
)
Select the menu item Code, enter the service password (see Appendix) and
save, then return to menu item Code (see also page 13).
k
Click on menu item Ser no
(press key k until the SER no (serial number) appears in the display)
)
Select menu Item SER no and enter the serial number of the weighing platform
) ( (
Return to “Setup” in the service mode.
ser-no
code
code
wp-1
setup