Connecting the nibp cuff hose – Welch Allyn 300 Series Vital Signs Monitor - User Manual User Manual
Page 15
Advertising
Directions for Use
Chapter 2 Setup
11
Connecting the NIBP Cuff Hose
Attach the hose to the monitor and the cuff as follows, referring to the illustration below:
1.
Screw the hose connector onto the NIBP connector on the monitor.
2.
Connect the monitor hose connector to the mating connector on the cuff.
For information on NIBP measurements, see
Threaded NIBP
Hose Connector
Advertising