Configuration menu – Welch Allyn 300 Series Vital Signs Monitor - User Manual User Manual
Page 22
Advertising
18
Chapter 2 Setup
Welch Allyn Vital Signs Monitor 300 Series
Configuration Menu
The configuration menu is accessed by pressing
and keeping it depressed for three
seconds. You then press
repeatedly until you reach the setting of interest.
54
98
37.0
128
MAP 90 kPa
71
Set Time and Date
MAP
NIBP Units
No action for 10 seconds
Power Off - all values saved
Configuration Menu
Press and hold
for 3 seconds
Enable
Disable
mmHg
kPa
Stream
Batch
Press and hold for 3
seconds
Press any button other than
Advertising