Welch Allyn 300 Series Vital Signs Monitor - User Manual - Manual (Page 7)

Directions for Use Chapter 1 General Information 3
The functions of the monitor front panel controls illustrated here are described in detail
elsewhere in this document.
Table 5. Front Panel Controls
Table 6. Front Panel Displays and Indicators
Product Overview
The monitor can monitor systolic and diastolic noninvasive blood pressure (NIBP), pulse
rate, and MAP (mean arterial pressure). Units configured with the appropriate options can
also simultaneously monitor temperature and SpO
2
, and can continuously monitor
pulse rate.
All vital-sign measurements are displayed on the front panel of the monitor. These
measurements can also be printed, using the optional integrated thermal printer.
The monitor provides programmable audible and visual alarms and automatic NIBP
measurements at selectable intervals. It can also be configured to provide an alarm-
activated Nurse Call function.
Accessory equipment connected to the analog and digital interfaces must be certified to
the respective IEC standards (IEC 60950 for data-processing equipment, IEC 60601-1 for
Set alarm limits Power on/off
Silence alarms Print patient data
Scroll up/down
Scroll forward/back
Increase/decrease value
(The scroll icon appears as these two arrows
in the documentation.)
Review patient data
Set an NIBP automatic measurement interval Start/stop an NIBP cycle (AUTO button)
Cycle to the next menu selections
SYS
DIA
SpO2
Systolic pressure
Diastolic pressure
Arterial hemoglobin oxygen saturation Temperature
Pulse rate pulse
amplitude
indicator
Pulse strength
message
window
MAP (mean arterial pressure) Neonatal
Degrees Celsius Pediatric
Degrees Fahrenheit Adult
Monitored temperature AC power
Battery charging (flashing)
Battery charged (steady)
Battery discharged
ºC ºC
ºF ºF
M M