Changing the time and date – Welch Allyn 300 Series Vital Signs Monitor - User Manual User Manual
Page 24
20
Chapter 2 Setup
Welch Allyn Vital Signs Monitor 300 Series
Changing the Time and Date
Follow these steps to change the time and date settings of the monitor internal clock.
1.
Press and hold
for 3 seconds. SET HOUR XX appears in the message window.
2.
Press
or
as needed to change XX to the current hour.
3.
Press
once to set the hours and change the display to SET MINUTE XX.
4.
Press
or
as needed to change XX to the current minute.
5.
Press
once set the minutes and to change the display to SET YEAR XX.
6.
Press
or
as needed to change XX to the current year.
7.
Press
once to set the year and change the display to SET MONTH XXX.
8.
Press
or
as needed to change XXX to the current month.
9.
Press
once to set the month and change the display to SET DAY XX.
10. Press
or
as needed to change XX to the current day.
SYS
DIA
SpO
2
%
/min
ºF
ºF
mmHg
SET HOUR 00