Welch Allyn 300 Series Vital Signs Monitor - User Manual - Manual (Page 23)

Directions for Use Chapter 2 Setup 19
Use the configuration menu to select and set the following parameters:
To change a configuration parameter:
1. Select the parameter as indicated above.
2. Change the value by pressing or .
3. Set the displayed new value either by doing nothing for 10 seconds or by pressing any
button other than
or . If you press a function button (such as ), the monitor
returns to normal operation with that function ( ) activated.
Time and Date hour
minute
year
month
day
MAP Measurement Enabled
Disabled
Blood Pressure
Measurement Units mmHg (millimeters of mercury)
kPa (kilopascals)
Print Mode Batch
Stream