Environmental – Welch Allyn 300 Series Vital Signs Monitor - User Manual User Manual
Page 79
Directions for Use
Chapter 7 Reference
75
Environmental
EMC Compliance
The monitor complies with all applicable and required standards for electromagnetic
interference.
•
It does not normally affect nearby equipment and devices.
•
It is not normally affected by nearby equipment and devices.
•
It is safe to operate the monitor in the presence of high-frequency
surgical equipment.
•
However, it is good practice to avoid using the monitor in extremely close
proximity to other equipment.
Guidance and manufacturer’s declaration—electromagnetic emissions
The Vital Signs Monitor 300 Series monitor is intended for use in the electromagnetic environment specified below. The
customer or the user of the monitor should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment—guidance
RF emissions
CISPR 11
Group 1
The Vital Signs Monitor 300 Series monitor uses RF energy only for its
internal function.Therefore, its RF emissions are very low and are not
likely to cause any interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
The Vital Signs Monitor 300 Series monitor is suitable for use in all
establishments, including domestic establishments and those directly
connected to the public low-voltage power supply network that
supplies buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fluctuations/flicker
emissions IEC 61000-3-3
Complies