Configuring operating parameters, ºf ºf ºc ºc m m, How to use the menu system – Welch Allyn 300 Series Vital Signs Monitor - User Manual User Manual
Page 20
Advertising
16
Chapter 2 Setup
Welch Allyn Vital Signs Monitor 300 Series
Configuring Operating Parameters
You can change several monitor operating parameters. When changed, these settings
become the default power-up settings.
How to Use the Menu System
The monitor menu system contains three sets of menus—settings, configuration,
and service.
Settings Menu
Access the settings menu by pressing the menu button
while in normal operation.
Then press
repeatedly to reach the setting of interest.
54
98
37.0
128
MAP 90mmHg
71
ºF
ºF ºC
ºC M
M
Patient Type
Target Cuff Inflation Pressure
Temperature Units
Temperature Type
Pulse Tone Volume
No action for 10 seconds
or
Press any button other than
Power Off - all values saved
except target inflation pressure
Settings Menu
Advertising