Directions for use chapter 2 setup 21 – Welch Allyn 300 Series Vital Signs Monitor - User Manual User Manual
Page 25
Directions for Use
Chapter 2 Setup
21
11. To save the displayed time and date settings, either do nothing for 10 seconds or
press any button other than
or
. If you press a function button (such as
), the
monitor returns to normal operation with that function (
) activated.
You cannot change the date and time while memory contains stored vital-signs data. If
you attempt to change the date and time setting while data is stored, the question
ERASE DATA? appears in the message window. If you confirm the data erasure, the
monitor erases the data from memory and returns you to the date-set function. If
you select NO, the stored data is retained in memory and the monitor returns to
normal operation.
SYS
DIA
SpO
2
%
/min
ºF
ºF
mmHg
0
0
09:24:17
0
SYS
DIA
SpO
2
%
/min
= YES = NO
SYS
DIA
SpO
2
%
/min
ERASE DATA?