CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 114)

9145E NID Software User’s Manual Diagnostics
SOAM Based Diagnostics
102
Figure 4-53 Delay Measurement Request screen
1. To enter the source MEP ID used to initiate delay measurement request, type 1 and press
Enter.
2. To enter a Destination MEP ID/MEP MAC address, type 2 and press Enter.
3. To enter the number of packets, type 3 and press Enter. Type a value of 3-99.
4. To enter the packet size (in bytes) to be used in delay measurement request, type 4 and
press Enter.
5. To enter a transmission rate, type 5 and press Enter.
6. To enter a response timeout in seconds, type 6 and press Enter.
7. To enter a Priority, type 7 and press Enter.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
9145E-761-0-0 V04.10 MP31: 92.31 21:41:54
----------------------- DELAY MEASUREMENT REQUEST-------------------------------
1) MEG ID: 200
2) Destination MEP ID: 100
3) Num of packets: 10
4) Packet size (bytes) 64-10000
5) Period: 1sec
6) Response timeout: 300 ms
7) Priority: 0
Select [1-5] for attributes, (S) to send:
------------------------------------Messages-----------------------------------