CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 226)

9145E NID Software User’s Manual Service OAM
Maintenance Associations
214
• S-Tag specifies the single S-Tagged UP MEP configured for the All-to-One Bundle.
(See the section “Management IP Configuration” on page 12.)
• None means that the frames are not tagged.
Press Enter. The CCM Interval field is highlighted.
5. Select a Continuity Check Message (CCM) Interval (1 sec, 10 sec, 100 ms). The CCM
interval is the interval at which CCMs are sent by a MEP. Press Enter. The Permissions
(Sender ID) field is highlighted
6. Select a Permissions (Sender ID) (Chassis, Manage, ChassisManage, Defer, None) and
press Enter. This value indicates what is to be included in the Sender ID TLV transmitted
in CCMs, LBMs, LTMs, and LTRs:
• None: the Sender ID TLV is not sent. This is the default value.
• Chassis: the Chassis ID Length, Chassis ID Subtype, and Chassis ID fields of the
Sender ID TLV are sent.
• Manage: the Management Address Length and Management Address of the
Sender ID TLV are sent.
• ChassisManage: the The Chassis ID Length, Chassis ID Subtype, Chassis ID,
Management Address Length and Management Address fields are sent.
• Defer: the contents of the Sender ID TLV is determined by the corresponding
Maintenance Domain configuration.
7. To accept the new Maintenance Association settings, type A and press Enter. The
Maintenance Association Attributes screen (Figure 11-14) opens.
8. To modify an attribute value, type the number of the attribute and press Enter, or press
Esc to return to the Maintenance Association list.
Figure 11-14 Create a New Maintenance Association screen
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
9145E-761-0-0 V04.10 21:41:54
---------------------CREATE A NEW MAINTENANCE ASSOCIATION-----------------------
1) MD ID: 1
2) MA ID: 2
3) Name: MA2
4) VLAN Tag Type: C/S
5) CCM Interval: 1 sec
6) Permissions (Sender ID): None
7) EVC Configuration Record: 1
Select [1-7], (A) to accept:
------------------------------------Messages-----------------------------------