CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 48)

9145E NID Software User’s Manual System Configuration
SNTP Client Configuration
36
15. RADIUS Server Priority Determines the order in which the RADIUS servers are
consulted. Enter a value between 1 and 255.
Figure 3-21 RADIUS Client Configuration screen
3.8 SNTP Client Configuration
Use the SNTP Client Configuration screen to configure the 9145E to use a primary and
secondary SNTP Server to automatically set the date and time. An accurate date and time in the
9145E assures accuracy for events listed in the System Log and for traps and alarms sent to the
system administrator. You can choose either of two methods for setting the date and time,
depending on your access to an external network and your need for accuracy.
• For accuracy within a large network, you can set up the 9145E to synchronize the system
date and time to an SNTP server.
• The time and date can be set manually. Refer to “Set Date and Time” on page 161 for
information to set the date and time manually.
To configure SNTP, select SNTP Client Configuration (7) from the System Configuration screen
and press Enter. The Simple Network Time Protocol (SNTP) Client Configuration screen (Figure
3-22) opens.
On the SNTP client Configuration screen, type the number of the SNTP setting to change and
then press Enter.
Press the Space bar to view settings, and press Enter.
1. SNTP Client UTC Offset (hours) The difference, in hours, between the local time of the
9145E and Coordinated Universal Time (UTC), which is similar to Greenwich Mean Time
(GMT); Range is -12 to 12
2. SNTP Client Observe DST Enables/Disables Daylight Savings Time (Summer Time)
and the date and time it starts and ends.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
9145E-101-1-0 V04.10 15:52:50
-------------------------RADIUS CLIENT CONFIGURATION---------------------------
1. RADIUS Client Mode : None
2. RADIUS Server IP Address : 0.0.0.0
RADIUS Server Shared Secret:
RADIUS Server Retries : 3
RADIUS Server Timeout : 5
RADIUS Server Priority : 1
3. RADIUS Server IP Address : 0.0.0.0
RADIUS Server Shared Secret:
RADIUS Server Retries : 3
RADIUS Server Timeout : 5
RADIUS Server Priority : 1
Select [1-3]:
-----------------------------------Messages------------------------------------