CANOGA PERKINS 9145E NID Software Version 4.10 User Manual
Page 86
9145E NID Software User’s Manual
Diagnostics
Network Performance
74
Table 4-2. Test Result Data Fields
The PM Test Results screen displays a list of test results stored in the NID storage buffer. It
allows you to select the results of a specific test and display it.
CPM Test results cannot be viewed until after a test completes. The CPM Test result will be
posted and display a “$” in front of the address.
1. To view PM Test results, on the Network Performance screen, type 7 and press Enter.
You can also view PM Test results, by typing V on the PM Scheduler screen and pressing
Enter.
The PM Test Results screen (Figure 4-29) opens
Packet Time to Live
Average local to remote Jitter
DF Bit
Total local to remote Jitter
DSCP Precedence
Maximum local to remote Jitter
DSCP Drop Probability
Local to remote Jitter bucket counts
(9 bucket values)
Packet Priority
Minimum remote to local Jitter
Latency Bucket Definitions
Average remote to local Jitter
Jitter Measurement Offset
Total remote to local Jitter
Jitter Bucket Definitions
Maximum remote to local Jitter
Out of Packet Indicator
Remote to local Jitter bucket counts (9 bucket values)