CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 228)

9145E NID Software User’s Manual Service OAM
Maintenance Associations
216
b. To remove a peer MEP, type 2 and press Enter. You are prompted for the MEP ID
number. Type the number and press Enter.
c. When all the peer MEPs have been configured, type A to accept and press Enter.
d. Press Esc to return to the Maintenance Associations Attributes screen.
NOTE: When you select a MEP ID while creating a maintenance end point from a peer MEPs list
(Figure 11-16), the selected MEP ID becomes local to the device and the rest of the MEP IDs
automatically become peers. You must define MEP IDs in a given MA prior to creating MEP in
the 9145E.
5. You can change the Permissions (Sender ID). Select None, Chassis, Manage,
ChassisManage, or Defer, and press Enter.
6. When you are finished, type A to accept the settings and press Enter.
7. Press Esc to return to the Maintenance Association List screen.
Figure 11-15 Maintenance Association Attributes screen
Canoga Perkins Corp. Ethernet Network Interface Device 02-JAN-2009
9145E-101-1-0 V04.10 00:25:46
----------------------MAINTENANCE ASSOCIATION ATTRIBUTES-----------------------
MD ID: 2 Level: 0
MA ID: 2 Name: port-layer
1) CCM Interval: 1 sec
VLAN Tag Type: S-Tag
VLAN List: 100
2) Add VLAN to VLAN List.
3) Remove VLAN from VLAN List.
4) View/Modify Peer MEPs list.
5) Permissions (Sender ID): None
Select [1-5] for attributes:
------------------------------------Messages-----------------------------------