CANOGA PERKINS 9145E NID Software Version 4.10 - Manual (Page 19)

Getting Started 9145E NID Software User’s Manual
Main Menu
7
6. Utilities The Utilities screen is used to set-up and display basic functional information.
Figure 2-3 Main Menu
7. Software Upgrade The Software Upgrade screen is used to download and install new
firmware using TFTP, swap firmware banks, and reset the Standard 9145E.
8. Manage Logged In Users The Manage Logged In Users screen is used by the
administrator to view current users, and to terminate user sessions when required.
9. Link OAM The OAM screen is used to set, change, and view various link layer
operational, administration and maintenance (OAM) functions.
10. CoS Configuration The Class of Service (CoS) Configuration screen is used to enable
or disable classification support, and to establish priority to queue mapping, set up queue
configuration, create drop profiles, and view queue statistics.
11. Service OAM The Service OAM screen is used to configure Connectivity Fault
Management.
12. EVC Configuration The Ethernet Virtual Connection (EVC) Configuration screen is used
to configure VLAN Multiplexing.
13. Bandwidth Profile Enforcement The Bandwidth Profile Enforcement screen is used to
configure bandwidth profiles for traffic management.
14. Logout Terminates your current session.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2012
Model 9145E-101-3-0 V41.70 10:55:13
---------------------------------------MAIN MENU-------------------------------
1) System Configuration
2) Diagnostics
3) Port Information
4) System Alarms
5) System Log
6) Utilities
7) Software Upgrade
8) Manage Logged In Users
9) Link OAM
10) CoS Configuration
11) Service OAM
12) EVC Configuration
13) Bandwidth Profile Enforcement
14) Logout
Select [1-14]:
------------------------------------Messages-----------------------------------