Notes, Connections – Panasonic AG-DTL1P User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
Example of connections to switch between 16 cameras for recording
2
Set all 8 of the 75
Q
termination switches to the
ON position.
2
Connect the 16 cameras to CAMERA IN
connectors [T] to [i6|.
3
Connect the TV monitor to the VIDEO OUT
connector.
<Notes>
• When connecting line-locked cameras, select ON
for the LL CAMERA item setting on the setting
menu shown on the P7 VIDEO OUT SEQUENCE
screen.
The images on the monitor will shake fractionally:
this is normal and not indicative of malfunctioning.
• This unit does not contain a compensation circuit.
Install a compensator when the total length of the
cables (coaxial 3C-2V) used to connect the
cameras exceeds 200 meters.
There is no need to install a compensator if the total
length is under 400 meters if coaxial cables (5C-2V)
with minimal transmission loss are used.
18